MAPEFER 1K
DESCRIPTION:
One-component, anti-corrosion cementitious mortar for steel reinforcement rods.
TECHNICAL DATA:
Maximum dimension of aggregate: 0.5 mm.
Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water.
Pot life of mix: approximately 1 hour (at +20°C).
Minimum applicable thickness: 2 mm.
Waiting time between each coat: approximately 2 hours.
Waiting time before applying mortar: 6-24 hours.
Classification: EN 1504-7.
Storage: 24 months.
Application: brush in two coats.
Consumption: 100 g/m for 8 mm diameter rebar (2 mm of product applied).
Packaging: boxes of 4×5 kg sachets.
MAPEFILL GP ME
DESCRIPTION:
General pupose non-shrink cementitious grout
PLANITOP 110 ME
DESCRIPTION:
Single-component, normal setting cementitious mortar for smoothing concrete surfaces
WHERE TO USE
Protection, smoothing and levelling of concrete surface imperfections up to 2 mm in a single application.
TECHNICAL DATA
Mixing ratio: 100 parts of Planitop 110 ME with 31-32 parts of water (approx. 6.2-6.4 liters of water per 20 kg bag)
Pot life of mix: approx. 1 hour
CONSUMPTION
1.3 kg/m² per mm of thickness (Dependent upon the surface substrate conditions).
YIELD
15.3 liters/20 kg.
PACKAGING
20 kg bags.
MAPEGROUT T60 ME
DESCRIPTION:
Thixotropic, sulphate and chloride resistant, fibre-reinforced structural repair mortar.
Where to use
Repairs to both new and old concrete structures or reinforced concrete elements subject to aggressive atmospheric conditions including chloride and sulphate attack.
Mixing ratio:
100 parts of Mapegrout T60 ME with15 parts water (approx. 3.75-4.25 l per 25 kg bags) and 0.25% of Mapecure SRA (one 0.25 kg bottle for 4 bags of Mapegrout T60 ME)
Yield
12.6 litres / 25 kg.
PACKAGING
25 kg bags.
MAPEGROUT ME 06
DESCRIPTION:
High strength, shrinkage compensated, super-flow micro-concrete.
Mapegrout ME 06 is used for structural repair where particular thickness and state of deterioration requires the use of high flow concrete and for, grouting of gaps with thickness ranging from 30-250mm.
Mixing ratio – One 25 kg of Mapegrout ME 06 with 3.1-3.4 litres of water.
Yield: 12.3 liters / 25 kg.
Packaging: 25 kg bags
