DESCRIPTION:

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures.
TECHNICAL DATA:
Consistency: powder.
Pot life of mix: approx. 1 h.
Classification: EN 1504-2.
Storage: 12 months.
Consumption: 1.5 kg/m² per mm of thickness.
Packaging: 25 kg bags.

DESCRIPTION:

Flexible, cementitious mortar for waterproofing.
(Formerly known as Idrosilex 2K)

DESCRIPTION:

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.
TECHNICAL DATA:
Consistency of mix: plastic-trowable.
Mixing ratio: comp. A: comp. B = 3 : 1.
Pot life of mix: approximately 1 hour.
Application temperature range: from +5°C to +35°C.
Minimum applicable thickness: 2 mm in 2 coats.
Classification: EN 1504-2 – coating (C) principles PI, MC and IR and EN 14891 norm.
EMICODE: EC1 R Plus – very low emission.
Storage: 12 months comp. A, 24 months comp. B.
Application: trowel or by spray.
Consumption:
– trowel: 1.7 kg/m² per mm of thickness;
– spray: 2.2 kg/m² per mm of thickness.
Packaging:
– 32 kg units: 24 kg bags + 8 kg tanks;
– 16 kg units: 2×6 kg sachets + 4 kg tanks.

DESCRIPTION:

Ultra fast setting and drying hydraulic binder for plugging water leaks.
Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing watertight rigid joints in hydraulic concrete structures, sewers, tanks and canals. Where seepage is present Lamposilex must be used before waterproofing with Idrosilex Pronto.
Once mixed with water Lamposilex forms a paste with a plastic consistency that sets in about 2 minutes.
Preparing the mix: pour 1 kg of Lamposilex into a bucket containing 280 grams of water while mixing very vigorously with a hand trowel until a homogeneous paste is obtained. For measures by volume, mix 2.5 parts of Lamposilex with 1 part of water.
Immediately apply the Lamposilex using a gloved hand.
Consumption:
1.8 kg per litre of cavity to be filled.
Packaging:
5 kg drums.

DESCRIPTION:

DESCRIPTION:

Fibre-filled liquid membrane in water emulsion with high solar reflectance and thermal emittance with a solar reflectance index (SRI) of 105.

TECHNICAL DATA:

Consistency: paste.
Application temperature range: from +5°C to +35°C.
Waiting time between first and second coat: 8-12 hours.
Set to foot traffic: 12 hours at +23°C.
Colour: highly reflective white.
Storage: 24 months.
Application: roller, brush or trowel.

Consumption:
• waterproofing membrane: at least 2 kg/m²;
• protective finish on bituminous substrates: – approx. 0.5 kg/m² on smooth membranes – approx. 0.9 kg/m² on mineral-fined membranes.
Packaging: 20 kg drums.

DESCRIPTION:

Rubber tape for elastic joints of waterproofing systems, coated on both sides with non-woven fabric.
TECHNICAL DATA:
Material type: rubber coated on both sides with non-woven polypropylene fabric.
Thickness: 0.68mm.
Tape width: 130 mm.
Tensile strength: 45 N / 15 mm.
Elongation at break: 315%.
EMICODE: EC1 Plus – very low emission.
Packaging:
– 30 m rolls;
– 10 m rolls;
– 90 ° and 270 ° angles;
– squares for 200×200 mm and 400×400 mm through holes.

DESCRIPTION:

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems
TECHNICAL DATA:
Colour: blue.
Weight: 150 g/m² ± 5%.
Mesh size: 4×4.5 mm.
Storage: unlimited.
Packaging: 50 m x 1 m rolls.