Primer SN
DESCRIPTION:
Two-component epoxy primer with fillers.
May be coloured with MAPECOLOR PASTE.
TECHNICAL DATA:
Mixing ratio: component A : component B = 80 : 20.
Colour of mix: neutral.
Consistency of the mix: viscous fluid.
Application temperature range: from +8°C to +35°C.
Storage: 24 months in its original sealed packaging.
Application: flat American trowel or smooth trowel.
Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate.
Packaging: 20 kg kits (A+B); 5 kg kits (A+B).
Primer Grip White
DESCRIPTION:
Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and walls.
TECHNICAL DATA:
Consistency: creamy liquid.
Colour: white.
Application: roller or brush.
Consumption: 0.2 and 0.3 kg/m², depending on the absorbency of the substrate.
Storage: 12 months in a dry area in its original, sealed packaging at a temperature of +5°C to +35°C.
Packaging: 10 kg drums.
Primer LT
DESCRIPTION:
Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use.
TECHNICAL DATA:
Consistency: fluid liquid.
Colour: white.
Application: roller or brush.
Consumption: 0.1 kg/m² between consecutive coats of ULTRATOP LOFT 0.1 and 0.2 kg/m², for other substrates, depending on the porosity.
Storage: 12 months in a dry area in its original, sealed packaging at a temperature of +5°C to +30°C.
Packaging: 5 kg cans.
Ultratop Loft F
DESCRIPTION:
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
TECHNICAL DATA:
Consistency: powder.
Colour: white or natural.
Workability time: 20 minutes.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 10 N/mm².
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4×5 kg alupacks.
Ultratop Loft W
DESCRIPTION:
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
TECHNICAL DATA:
Consistency: fine powder.
Colour: white or natural.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 12 N/mm².
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4×5 kg alupacks.
Ultratop Base Coat
DESCRIPTION:
One-component acrylic formulate in water dispersion used as a base coat before applying protective finishes on ULTRATOP, ULTRATOP LIVING and ULTRATOP LOFT
TECHNICAL DATA:
Colour: milky white.
Consistency: liquid.
Storage: 12 months in a dry, covered area in its original packaging at a temperature of +12°C to +30°C. Protect from freezing weather.
Application: ready-mixed. Apply a single coast to form an even, thin film with a medium pile roller (such as mohair); go over the surface in criss-cross strokes without leaving excess product on the surface.
Consumption: 50-80 g/m² depending on the porosity of the substrate.
Packaging: 10 kg tanks.
Mapefloor finish 58 W
DESCRIPTION:
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion.
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B = 10:1 transparent – 11:1 if coloured.
Colour of mix: transparent or coloured.
Consistency of mix: fluid.
Density of mix (kg/m³): 1,065-1,095..
Storage: 12 months in its original packaging at +12°C to +30°C.
Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating.
Packaging: 5.5 kg transparent or 6 kg coloured kits (A+B).
