PRIMER SN
DESCRIPTION:
Two-component epoxy primer with fillers.
May be coloured with MAPECOLOR PASTE.
TECHNICAL DATA:
Mixing ratio: component A : component B = 80 : 20.
Colour of mix: neutral.
Consistency of the mix: viscous fluid.
Application temperature range: from +8°C to +35°C.
Storage: 24 months in its original sealed packaging.
Application: flat American trowel or smooth trowel.
Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate.
Packaging: 20 kg kits (A+B); 5 kg kits (A+B).
PRIMER G
DESCRIPTION:
Synthetic resin-based primer in water dispersion.
Applications:
Treating gypsum or anhydrite surfaces prior to installing
ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).
Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
Storage: 24 months. Protect from frost.
Consumption
0.1-0.2 kg/m2 depending on use.
Packaging
25-10-5 kg drums and 12×1 kg packs.
ECO PRIME T
DESCRIPTION:
Solvent-free acrylic primer with a very low emission level of volatile organic compounds (VOC) for absorbent and non-absorbent substrates.
Technical data:
Consistency: fluid liquid.
Colour: white.
Dilution rate: as is on non-absorbent surfaces, 1 : 1 or 1 : 2 on absorbent surfaces.
Waiting time before applying smoothing compounds: 1-5 hours according to the surrounding conditions and the absorption of the substrate.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: roller or brush.
Consumption: 0.10-0.20 kg/m².
Packaging: 5 and 20 kg drums.
