Repair cracks by filling them with Eporip
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds
Application: by brush, trowel, pouring.
Storage: 24 months.
Consumption: 0.5-2 kg/m2 (1.35 kg per litre of cavity to be filled)
Packaging: 10 and 2 kg kits.
Primer is not generally required.
Two-component epoxy primer with fillers.
May be coloured with MAPECOLOR PASTE.
Mixing ratio: component A : component B = 80 : 20.
Colour of mix: neutral.
Consistency of the mix: viscous fluid.
Application temperature range: from +8°C to +35°C.
Storage: 24 months in its original sealed packaging.
Application: flat American trowel or smooth trowel.
Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate.
Packaging: 20 kg kits (A+B); 5 kg kits (A+B).
Mapefloor FC 200
High build epoxy resin floor coating
Application: straight trowel or roller.
Consumption: Primer SN (A+B): 0.15-0.2 kg/m²
Multi-layered smooth coating (A+B ): 0.3 Kg/m2
Multi-layered non-slip coating (A+B): 0.35 kg/ m2
Packaging: 25.5 kg kits (component A = 22 kg; component B = 3.5 kg) in containers.
Storage: The product must be stored in its original packaging in a dry place at a temperature of
between +15°C and +35°C. Maximum 24 months.