Ultraplan Eco 20 System


Repair cracks by filling them with Eporip


Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds

Application: by brush, trowel, pouring.
Storage: 24 months.
Consumption: 0.5-2 kg/m2 (1.35 kg per litre of cavity to be filled)
Packaging: 10 and 2 kg kits.

Ultraplan eco 20


Rapid hydrating, fast-drying self-levelling compound.


Thickness per coat: from 1 to 10 mm
Pot life: 20-30 minutes
Setting time: 45-60 minutes
Set to light foot traffic: 3-4 hours
Waiting time before subsequent bonding: 24-48 hours
Colour: grey
Consumption: 1.6 kg/m² per mm of thickness.
Packaging: 23 kg bags.
Storage: 12 months in a dry place in original packing

Eco prim T


Solvent-free acrylic primer with a very low emission level of volatile organic compounds (VOC) for absorbent and non-absorbent substrates.

Technical data:

Consistency: fluid liquid.
Colour: white.
Dilution rate: as is on non-absorbent surfaces, 1 : 1 or 1 : 2 on absorbent surfaces.
Waiting time before applying smoothing compounds: 1-5 hours according to the surrounding conditions and the absorption of the substrate.
EMICODE: EC1 Plus – very low emission.
Storage: 12 months.
Application: roller or brush.
Consumption: 0.10-0.20 kg/m².
Packaging: 5 and 20 kg drums.




Synthetic resin-based primer in water dispersion.


Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).

Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
Storage: 24 months. Protect from frost.
0.1-0.2 kg/m2 depending on use.
25-10-5 kg drums and 12×1 kg packs.